VENT FILTER MPK02

General description

This vent filter is designed to protect purified water stored in 30/60/100 liter PE storage tanks from airborne contaminants. It is used when the reservoir is fed with RiOs^™ reverse osmosis (RO, Type 3) product water.

A vent filter acts by filtering the air that enters the water reservoir. As the reservoir is emptied of water, the air entering the system passes through the filter.

The filter¢s cartridge is constructed from polypropylene, polyethersulfone (PES) and styrene-acrylonitrile (SAN), and it is carefully assembled following a dichloromethane (DCM)-free process.

This vent filter is replaced twice a year for optimal results.

For use with 30/60/100 PE storage tanks fed by RO (Type 3) water from RiOs^™, RiOs^™ Essential, Direct-Q^® and Milli-Q^® Direct systems.

Application

The vent filter provides advanced protection against airborne contaminants.

Features and Benefits

• Allows to guarantee that storage tank water quality is maintained to meet the required water quality specifications.
• The vent filter consists of two 0.65 μm hydrophobic membrane discs for particle and bacterial retention.

Other Notes

Directions for Use

• Organism Retention: Microorganisms
• Mode of Action: Filtering
• Application: General laboratory analysis
• Intended Use: Air purification
• Instructions for Use: This item provides water filtered through 0.45 μm membranes. Refer to the system equipment user guide section "Using the System" (provided with the system).
• Storage Statement: Store in a dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Legal Information

DIRECT-Q is a registered trademark of Merck KGaA, Darmstadt, Germany

Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany

Milli-Q is a registered trademark of Merck KGaA, Darmstadt, Germany

RIOS is a trademark of Millipore Corporation