Enhancer Membrane (Nylon, 12 x 9cm)

EnhancerTM allows for the rapid application of up to 384 protein or nucleic acid samples on to a 12 x 9cm membrane for subsequent analysis. Samples are applied to a nitrocellulose or nylon membrane by capillary action, resulting in concentration of sample due to minimal diffusion. EnhancerTM prevents sample waste and cross contamination of samples. Grid formation allows for easy identification of samples after probing. Each EnhancerTM is provided with a set of 12 x 8 well application strips. EnhancerTM is provided with a flip-application tray which accommodates 96 application tubes. The application tray may be flipped four times to apply 4 x 96 samples on a 12 x 9cm membrane. A total of 384 samples may be applied where spots or samples are 3-4mm apart. Load 2-5μl samples into the sample application tubes which allow deposition of the samples on the binding membranes by a point of entry capillary action. No risk of cross contamination or waste of samples. In less than 30 minutes you can prepare a dot blot or an array of up to 384 samples. Features Increase dot blot sensitivity by >10 fold. Apply up to 384 protein or nucleic acid samples. No cross-contamination risk. No expensive electronic equipment required. Applications High throughput screening of: o Multiple protein samples with specific antibodies. o Nucleic acid samples with specific hybridization probe. Production of dot blots for 1-384 samples. Protein Binding Buffer: For increased protein binding efficiency. Enhancer TM Sample Tubes: 8 well strips for sample application Enhancer TM Membranes: Precut nitrocellulose or nylon membranes.