Fiber sensors

Fiber Analyzers that use pre-heated reagents for fiber analysis according to Weende, Van Soest and other official methods. High Performance Rapid analysis &ndash 2 hours vs.

Fiber Analyzers that use pre-heated reagents for fiber analysis according to Weende, Van Soest and other official methods. High Performance Rapid analysis &ndash 2 hours vs.

Fiber Analyzers that use pre-heated reagents for fiber analysis according to Weende, Van Soest and other official methods. High Performance Rapid analysis &ndash 2 hours vs.

Fiber Analyzers that use pre-heated reagents for fiber analysis according to Weende, Van Soest and other official methods. High Performance Rapid analysis &ndash 2 hours vs.

Harmonized Tariff Code: 6815.10

The MI-150 is UL, CE, and C-UL approved for global use. All Fiber-Lite MI-150 Illuminators come backed with a 3 year warranty. No Adapters required for MI Series Accessories.

Fiberglass support rods, 13mm (1/2) O.D.

Requires but does not include, Transfer-Optic for Mono-Fibers, Light Shield (N1016074), and one of the following Probe Tips: Probe Tip, 2 mm pathlength (N1016073) Probe Tip, 5 mm pathlength (N1016072) or Probe Tip, 10 mm pathlength (N1016071).

Excellent choice for use in environments with extreme temperature up to 900°C and/or aggressive chemical exposure. Retention loading and air flow permeation similar to glass microfiber filters. Use wherever filters of the highest purity are needed.

Excellent choice for use in environments with extreme temperature up to 900°C and/or aggressive chemical exposure. Retention loading and air flow permeation similar to glass microfiber filters. Use wherever filters of the highest purity are needed.

Excellent choice for use in environments with extreme temperature up to 900°C and/or aggressive chemical exposure. Retention loading and air flow permeation similar to glass microfiber filters. Use wherever filters of the highest purity are needed.

T0RXT20J1 TORX DRIVER T20