Single-stage, stainless steel Two pressure gauges and CGA-180 fitting Stainless steel diaphragm and Kel-F seat Accurate pressure control even at low flow rates Individually tested for leaks and impurities
Single-stage, stainless steel Two pressure gauges and CGA-180 fitting Stainless steel diaphragm and Kel-F seat Accurate pressure control even at low flow rates Individually tested for leaks and impurities
Single-stage, stainless steel Two pressure gauges and CGA-180 fitting Stainless steel diaphragm and Kel-F seat Accurate pressure control even at low flow rates Individually tested for leaks and impurities
Single-stage, stainless steel Two pressure gauges and CGA-180 fitting Stainless steel diaphragm and Kel-F seat Accurate pressure control even at low flow rates Individually tested for leaks and impurities
Single stage regulators for use with non-corrosive gas where single stage regulation is sufficient (5596C32, C35, C55, D40) Sintered metal filter on inlet stem to protect internal parts 2.5 inch diameter diaphragm for efficient pressure control
Single stage regulators for use with non-corrosive gas where single stage regulation is sufficient (5596C32, C35, C55, D40) Sintered metal filter on inlet stem to protect internal parts 2.5 inch diameter diaphragm for efficient pressure control
The SII cyclonic Scott dual spray chamber, made of quartz, is designed to homogenize sample aerosol prior to introduction to the ICP-MS instrument. It features a secure, leak-free threaded drain port, o-ring-free connections to the nebulizer and
The SII cyclonic Scott dual spray chamber, made of quartz, is designed to homogenize sample aerosol prior to introduction to the ICP-MS instrument. It features a secure, leak-free threaded drain port, o-ring-free connections to the nebulizer and
It is used for driving the pneumatic valves of the PerkinElmer 2400 and PerkinElmer 2410. It has a maximum inlet pressure of 3000psi and a CGA fitting size of 590, which is appropriate for air.
It is used for driving the pneumatic valves of the PerkinElmer 2400 and PerkinElmer 2410. It has a maximum inlet pressure of 3000psi and a CGA fitting size of 590, which is appropriate for air.