Filter Replacement Indicator for Aromatic Diisocyanates, 3.5" x 1", 3/4" MNPT (C003B-190373)

Carbon Adsorbers and Filters Change Indicators for Acids, Ammonia, Ammonia & Hydrogen Sulfide, Aromatic Diisocyanates, Basic Vapors, Halogens, Hydrazine, Formaldehyde, Hydrogen Sulfide and Mercury. The breakthrough (saturation) indicators are colorimetric indicators that indicate the saturation and exhaustion of carbon adsorbers and filters. The indicators are reliable and cost effect means for protection from exposure to toxic gases and vapors in the work place. Indicators change color when carbon adsorbers, carbon scrubbers and filters are saturated with target gases or vapors. Hence alerting the user to replace the exhausted carbon adsorber or filter. Indicators are available for acid vapors (e.g. hydrochloric acid, nitric acid, acetic acid and sulfur dioxide), ammonia, ammonia & hydrogen sulfide, aromatic diisocyanates vapors (e.g. TDI and MDI), basic vapors (e.g. ammonia and aliphatic amines), halogens (Chlorine, Bromine and Iodine), hydrazine, hydrogen sulfide, formaldehyde and mercury. The indicators are easily connected to the 3â„4 inch female NPT outlet of the carbon absorber or filter using the 3â„4 inch male NPT threading at the bottom of the indicator. It is highly sensitive to targeted gases or vapors. It operates at temperatures -20 - 4°C to 50 - 65°C (-4 - 39°F to 122 -149°F) and humidities 5% RH to 85%RH. The indicator is 3.5 inch tall, 1 inch diameter and you can observe the bright vibrant color change from all directions. The unique design of the indicator prevents any color change due to exposure to contaminants in the surrounding environment and changes color only when carbon absorber or filter is saturated.