6' Protector Premier I-S Laboratory Hood, with 2 service fixtures, 208-230V, 50/60Hz

Protector Premier I-S Laboratory Hoods incorporate a sleek interior with a molded one-piece fiberglass liner, the signature feature of Labconco's leading line of fume hoods since 1961. The one-piece liner of specially-formulated, fiberglass-reinforced polyester offers corrosion and fire resistance and easy clean up. Without seams, the interior has fewer points of deterioration for longer life. Designed for use with Labconco's Intelli-Sense Multi-Speed Blowers, Protector Premier I-S Hoods feature integrated sash position blower controls. As the sash is raised or lowered, sensors alert the blower to change speeds to maintain a safe face velocity. That face velocity is displayed on the factory-installed GuardianTM Digital Airflow Monitor for users' peace of mind. Protector Premier Hoods incorporate many containment-enhancing features including Clean-SweepTM technology and the Eco-FoilTM air foil. Testing confirms the Protector Premier I-S Hood meets the SEFA-1 standard of a low velocity, high performance hood and may be operated as low as 60 fpm. All models feature: By-pass airflow design • Eco-FoilTM Air Foil with aerodynamic Clean-SweepTM airflow openings Cord-KeeperTM Slots on left and right side of air foil Factory-installed Intelli-Sense Blower control box Factory-installed sash position activated blower speed switches Factory-installed GuardianTM Digital Airflow Monitor Glacier white powder-coated steel exterior One-piece molded fiberglass liner and pre-set baffle(s) with flame spread less than 25 per ASTM E-84 Tempered safety glass vertical-rising sash with powder-coated sash handle 37.5" (95.3 cm) high sightline from the work surface to header panel Pre-wired LED lighting with vapor-proof design and ADA-compliant light and blower switches. Lighting rated to 50,000 hours. Removable front and side panels, and front service access panels for access to plumbing and electrical wiring Molded fiberglass 12.81" ID exhaust connection(s) Fixtured models feature: Two pre-plumbed service fixtures with forged brass valves, lower right side with brass tubing for gas and lower left side with copper tubing for cold water. Components for converting either or both fixtures to air and vacuum are provided. Inlet tubing is not provided. One pre-wired GFCI electrical duplex receptacle on lower right side and, on 8' models only, one additional pre-wired GFCI electrical duplex receptacle on lower left side Required (not included): Intelli-Sense Multi-Speed Remote Blower (without control box) Ductwork Work Surface Base Cabinet or Stand Dedicated Exhaust