Needle for IV/arterial administration ports

The MiniVap&reg is designed for low usage R&D departments where low numbers of individual plates or vials need drying. The MiniVap&reg is easy to operate and maintain.

Rigid pack packaging Aluminum luer lock hub May be autoclaved or gas sterilized for use in O.R./procedure packs IN Bevel - Intermediate bevel for intradermal injections/skin testing.

Allow for visual observation of all reactions and aerosols under pressure PVC coated glass minimizes potential hazard Additional protection furnished with optional clear plastic shield - highly recommended 1/8&rdquo NPT Threaded hole in needle

A simple, all PTFE septum injector. Allows direct, on-column injection to the center of the filter disc at top of column without stopping the solvent flow through the 1/4-28 female side thread (with or without helicoil).

Slip-on needles for A-2, C, and D Series syringes feature a needle extension through the hub that fits inside the PTFE tip on the syringe, eliminating the dead volume. It is leak-tight to 250psi and is suitable for routine laboratory applications.

NEEDLES SIDE-PORT FOR SERIES A GAS TYPE PK 3

GENOVA/AQUANOVA DISPLAY/CPU

O RING BS333 N170

INOCULAT NEEDLE MICRO 5PK

VALVE NEEDLE - LPD Spare Parts, Spare Parts CWS

PORT1 - LR&F, High Performance LR&F MjC

ASYPRESSURE EQUALIZATION PORT - LPD Spare Parts, Spare Parts Cold Storage