Medical radiological shielding apron racks

CAS: 7440-57-5 EC No: 231-165-9 MDL No: MFCD00003436 RTECS: MD5420000 Solid Molecular Formula: Au MW: 196.97 Melting Point: 1063&deg Boiling Point: 2808&deg Density (g/mL): 19.3

CAS: 7440-57-5 EC No: 231-165-9 MDL No: MFCD00003436 RTECS: MD5420000 Solid Molecular Formula: Au MW: 196.97 Melting Point: 1063&deg Boiling Point: 2808&deg Density (g/mL): 19.3

CAS: 7429-90-5 EC No: 231-072-3 MDL No: MFCD00134029 RTECS: BD0330000 Solid Molecular Formula: Al MW: 26.98 Melting Point: 660.4&deg Boiling Point: 2460&deg Density (g/mL): 2.7

CAS: 7440-57-5 EC No: 231-165-9 MDL No: MFCD00003436 RTECS: MD5420000 Solid Molecular Formula: Au MW: 196.97 Melting Point: 1063&deg Boiling Point: 2808&deg Density (g/mL): 19.3

PrEST Antigen EBI3 Epstein-Barr virus induced 3, 100ul UN 16

In a reversed-phase mode, Cyano columns are the most polar and least retentive of all reversed-phase packings. Extremely hydrophobic compounds, which do not elute on standard C18 and C8 packings with typical reversed-phase eluents, can be

The YMC-Pack C4 stationary phase surface hydrophobicity is lower than that of both ODS and C8 Retention times of samples on YMC-Pack C4 therefore tend to be shorter than those on ODS or C8. Separation characteristics of YMC-Pack C4 also differ from

YMC-Pack ODS-A has a highly endcapped surface structure and appropriate hydrophobicity for separation of a wide range of compounds. It is produced under strict quality control with respect to 50 or more parameters in order to ensure stable quality.

YMC-Pack ODS-A has a highly endcapped surface structure and appropriate hydrophobicity for separation of a wide range of compounds. It is produced under strict quality control with respect to 50 or more parameters in order to ensure stable quality.

YMC-Pack ODS-A has a highly endcapped surface structure and appropriate hydrophobicity for separation of a wide range of compounds. It is produced under strict quality control with respect to 50 or more parameters in order to ensure stable quality.

YMC-Pack ODS-A has a highly endcapped surface structure and appropriate hydrophobicity for separation of a wide range of compounds. It is produced under strict quality control with respect to 50 or more parameters in order to ensure stable quality.

ODS-A is a high coverage, fully endcapped C18 phase which exhibits exceptional batch-to-batch reproducibility. ODS-A columns are noted for their high efficiency, selectivity and long lifetimes.