akash.verma@cenmed.com
(732) 447-1115-
FFGA100-Ni-ETA thin film of pure formvar resin coats a single hole grid. The thickness range is as follows: Standard: Approx. 10nm Ultra-Thin (UL): 5-6nm Thick (TH): 15-20nm Extra Thick (ET): 25-50nm NOTE: All of our film is laid on the shiny side of the grid. -
FFGA800-Cu-ETA thin film of pure formvar resin coats a single hole grid. The thickness range is as follows: Standard: Approx. 10nm Ultra-Thin (UL): 5-6nm Thick (TH): 15-20nm Extra Thick (ET): 25-50nm NOTE: All of our film is laid on the shiny side of the grid. -
FFGA600-Cu-ETA thin film of pure formvar resin coats a single hole grid. The thickness range is as follows: Standard: Approx. 10nm Ultra-Thin (UL): 5-6nm Thick (TH): 15-20nm Extra Thick (ET): 25-50nm NOTE: All of our film is laid on the shiny side of the grid. -
FFGA400-Cu-ETA thin film of pure formvar resin coats a single hole grid. The thickness range is as follows: Standard: Approx. 10nm Ultra-Thin (UL): 5-6nm Thick (TH): 15-20nm Extra Thick (ET): 25-50nm NOTE: All of our film is laid on the shiny side of the grid. -
FFGA300-Cu-ETA thin film of pure formvar resin coats a single hole grid. The thickness range is as follows: Standard: Approx. 10nm Ultra-Thin (UL): 5-6nm Thick (TH): 15-20nm Extra Thick (ET): 25-50nm NOTE: All of our film is laid on the shiny side of the grid. -
FFGA200-Cu-ETA thin film of pure formvar resin coats a single hole grid. The thickness range is as follows: Standard: Approx. 10nm Ultra-Thin (UL): 5-6nm Thick (TH): 15-20nm Extra Thick (ET): 25-50nm NOTE: All of our film is laid on the shiny side of the grid. -
0109-3C-PODumont produces high quality handmade tweezers, and has gained the popularity of all researchers over the years. Developed in 1875 by Arnold Dumont in La Sagne, Switzerland. -
62150-11Glue bonded, silicon carbide for fast cutting. All are 1â„2&rdquo (12.7mm) long. Available grit ranges: Coarse (60), Medium (80), and Fine (120). -
62150-10Glue bonded, silicon carbide for fast cutting. All are 1â„2&rdquo (12.7mm) long. Available grit ranges: Coarse (60), Medium (80), and Fine (120). -
W810313-TXSShorter and Narrower Pipette Shaft allows tip to be in closer range when pipetting into smaller diameter microtubes and vials Very Lightweight (88 grams) helps eliminate fatigue during long hours of pipetting Ultra-Soft Plunger greatly reduces thumb -
420540-0125CHX COLUMN 13X250MM -
CM-FLATIdeal for thermal cyclers with screw down lids to prevent evaporation.
