akash.verma@cenmed.com
(732) 447-1115-
1354G117S/Steel Raised lid w/divider - mm 20 h -
5302-16The Ricca Chemical 1000 ppm nickel standard works as a catalyst to increase the rate of chemical reactions. It can also be used for nickel plating, coloring of ceramics and in the manufacture of batteries. -
RV010332-250NMatrix: 2% HNO3 Min: >= 995 Max: = Manufactured and Tested in an ISO 17025/Guide 34 Accredited Facility -
5302-4The Ricca Chemical 1000 ppm nickel standard works as a catalyst to increase the rate of chemical reactions. It can also be used for nickel plating, coloring of ceramics and in the manufacture of batteries. -
22980-214.5Drilled Cyclo-Uniliner, Hole near Top, 4.0mm x 6.3 x 78.5 fo -
21055-213.5Use of these liners helps ensure an inert GC flow path for higher sensitivity, accuracy, and reproducibility. Consistent quality with exceptional batch-to-batch uniformity Low to zero bleed or background contamination -
21055-211.5Use of these liners helps ensure an inert GC flow path for higher sensitivity, accuracy, and reproducibility. Consistent quality with exceptional batch-to-batch uniformity Low to zero bleed or background contamination -
RT-00001-600Rapid Tester Ideal for quality assurance, fuel dilution and compliance testing Meets EPA and DOT requirements Offers wide temperature range from -30° to 300°C (-36° to 572°F) Verify the flash point of petroleum, paints, coatings and -
CF200F1-Au-50A thin film of pure carbon deposited on one side of the grid. The thickness range is as follows: Standard: Approx. 5-6nm Ultra-Thin (UL): 3-4nm Thick (TH): 10nm Extra Thick (ET): 20-30nm NOTE: All of our film is laid on the shiny side of the grid. -
CF100H-Au-ETA thin film of pure carbon deposited on one side of the grid. The thickness range is as follows: Standard: Approx. 5-6nm Ultra-Thin (UL): 3-4nm Thick (TH): 10nm Extra Thick (ET): 20-30nm NOTE: All of our film is laid on the shiny side of the grid. -
CF400H-Au-ETA thin film of pure carbon deposited on one side of the grid. The thickness range is as follows: Standard: Approx. 5-6nm Ultra-Thin (UL): 3-4nm Thick (TH): 10nm Extra Thick (ET): 20-30nm NOTE: All of our film is laid on the shiny side of the grid. -
CF300H-Au-ETA thin film of pure carbon deposited on one side of the grid. The thickness range is as follows: Standard: Approx. 5-6nm Ultra-Thin (UL): 3-4nm Thick (TH): 10nm Extra Thick (ET): 20-30nm NOTE: All of our film is laid on the shiny side of the grid.
