Corrosion testers

The stainless steel 100mm iob probe cap seal is manufactured from 316l stainless steel and has a red-silicone sealing gasket with a 100mm blue polypropylene screw cap. The stainless steel probe cap seal has four accessory ports surrounding a

304 Stainless Steel NW flange adapters for use with circulators. Connections either terminate in M16x1, M24x1.

Tests the corrosiveness of LPG to copper by immersion of a polished test strip in the sample inside a test cylinder at elevated temperature. After one hour the test strip is removed and compared against the ASTM Copper Strip Corrosion Standards.

Chuck for polishing test specimens. Includes locknut and shaft for mounting on accessory drive motor Accessory for Rust Preventing Characteristics Oil Bath (7151L35) and (7151L38)

TEST SPECIMEN, RUST w / Type 2 PTFE Holder

TEST SPECIMEN, RUST w / Type 2PMMA Holder

Steel test specimens for ASTM D665/NACE TM-01-72 Machined to ASTM/NACE specifications Without holder

For high temperature, over the road, or conductive applications. Available with zinc or stainless steel retainer rings. One bag required per shelf. 4 pairs per bag.

GILDER FINDER GRIDS G400F1, COPPER, 400&

GILDER FINDER GRIDS G300F1, COPPER, 300&

LEADED BRASS ALLOY, CU58ZN39PB3, 100MM &

BRASS, TUBE,CU63%/ZN37%, OUTSIDE DIAMET&