Two sizes, both featuring an O-Ring sealed, greaseless flange with 6517 Quick Release Clamp. Top flange is ground flat, bottom mating flange has an O-Ring groove for a CAPFE O-Ring (PTFE encapsulated silicone), held tightly together via a quick
Two sizes, both featuring an O-Ring sealed, greaseless flange with 6517 Quick Release Clamp. Top flange is ground flat, bottom mating flange has an O-Ring groove for a CAPFE O-Ring (PTFE encapsulated silicone), held tightly together via a quick
A 50mm size for samples of approximately 25mL With a #50 O-Ring joint, unit measures 200 mm high x 50 mm diameter. The stopcock is positioned so that the bottom can be firmly clamped.
A 50mm size for samples of approximately 25mL With a #50 O-Ring joint, unit measures 200 mm high x 50 mm diameter. The stopcock is positioned so that the bottom can be firmly clamped.
With drawn capillary tip for the introduction of gases below the liquid surface. Outside diameter is 7 mm. Length approximately 320mm (12-1/2"). For use with #7 Ace-Thred. Hose connection on bent adapter is size A.
With drawn capillary tip for the introduction of gases below the liquid surface. Outside diameter is 7 mm. Length approximately 320mm (12-1/2"). For use with #7 Ace-Thred. Hose connection on bent adapter is size A.
With drawn capillary tip for the introduction of gases below the liquid surface. Outside diameter is 7 mm. Length approximately 320mm (12-1/2"). For use with #7 Ace-Thred. Hose connection on bent adapter is size A.
With drawn capillary tip for the introduction of gases below the liquid surface. Outside diameter is 7 mm. Length approximately 320mm (12-1/2"). For use with #7 Ace-Thred. Hose connection on bent adapter is size A.