akash.verma@cenmed.com
(732) 447-1115-
219420-2.5LCAS: 9005-65-6 MDL No: MFCD00082107 RTECS: WG2932500 Liquid Boiling Point: >100° Flash Point: >110°C (>230°F) Density (g/mL): 1.064 Refractive Index: 1.475 -
122425-2.5KGCAS: 101-84-8 EC No: 202-981-2 MDL No: MFCD00003034 RTECS: KN8970000 UN No: UN3077 Haz Class: 9 Packing Group: III Liquid/Low Melting Solid Linear Formula: (C<sub>6</sub>H<sub>5</sub>)<sub>2</sub>O MW: 170.21 Melting Point: 25-27° Boiling -
Model 1500-RVModel 8583J10: Produces propeller speeds from approximately 200 to 10,000 rpm Compact and quiet operates on compressed air at pressures from 30 to 100 psi (210 to 690 kPa) Sturdy, smooth-running motor develops 1/6 hp (120 W) at 80 psi (550 kPa) -
Model 1500Model 8583J10: Produces propeller speeds from approximately 200 to 10,000 rpm Compact and quiet operates on compressed air at pressures from 30 to 100 psi (210 to 690 kPa) Sturdy, smooth-running motor develops 1/6 hp (120 W) at 80 psi (550 kPa) -
Model 750Model 8583J10: Produces propeller speeds from approximately 200 to 10,000 rpm Compact and quiet operates on compressed air at pressures from 30 to 100 psi (210 to 690 kPa) Sturdy, smooth-running motor develops 1/6 hp (120 W) at 80 psi (550 kPa) -
Model G5-RVModel 8583J10: Produces propeller speeds from approximately 200 to 10,000 rpm Compact and quiet operates on compressed air at pressures from 30 to 100 psi (210 to 690 kPa) Sturdy, smooth-running motor develops 1/6 hp (120 W) at 80 psi (550 kPa) -
Model G-5Model 8583J10: Produces propeller speeds from approximately 200 to 10,000 rpm Compact and quiet operates on compressed air at pressures from 30 to 100 psi (210 to 690 kPa) Sturdy, smooth-running motor develops 1/6 hp (120 W) at 80 psi (550 kPa) -
Model AModel 8583J10: Produces propeller speeds from approximately 200 to 10,000 rpm Compact and quiet operates on compressed air at pressures from 30 to 100 psi (210 to 690 kPa) Sturdy, smooth-running motor develops 1/6 hp (120 W) at 80 psi (550 kPa) -
8093-35A turbine type agitator, available for 19mm and 28mm shafts. 19mm six blade agitators are open in the center to allow custom positioning on drilled type or knob type 8076, 8078 & 8079 shafts. -
8093-25A turbine type agitator, available for 19mm and 28mm shafts. 19mm six blade agitators are open in the center to allow custom positioning on drilled type or knob type 8076, 8078 & 8079 shafts. -
6469-32Complete self-supporting pilot plant assembly. Needs only to be located near coolant and electrical outlet. -
6469-30Complete self-supporting pilot plant assembly. Needs only to be located near coolant and electrical outlet.
