Bi distillation units

Adapter is vacuum jacketed and can be used as a distilling head to connect a condenser with the top of the distillation column. The 10/30 top outer joint is for use with CG-3506, 75mm immersion thermometers.

Distillation head with condenser sealed to a Vigreux column. Top thermometer joint is a 10/18 for use with a 1&rdquo immersion thermometer. Vacuum adapter has an outer joint and accepts a CG-1279-11 distribution adapter.

Still head in 125mL or 500mL capacity for use in re-purification of solvents under inert atmosphere. One-piece design of condenser and storage reservoir eliminates multiple connections usually associated with distillation setup.

Radial style distillation receiver allows four flasks to be progressively filled. Upper vacuum adapter is bent at a 105&ordm angle.

Similar in design to AF-0720 but without delivery adapter. Lower 3-way valve has been replaced with a single 0-4mm Chem-Vac&trade Chem-Cap&reg valve for draining distillate back into the flask.

Modified Dean-Stark trap allows for more efficient cooling and separation of the azeotrope during distillation. Graduated from 0 to 10ml in 0.2mL subdivisions. **Design suggested by Dr. Craig Merlic, University of California, Los Angeles, California

Modified Dean-Stark trap allows for more efficient cooling and separation of the azeotrope during distillation. Graduated from 0 to 10ml in 0.2mL subdivisions. **Design suggested by Dr. Craig Merlic, University of California, Los Angeles, California

Barrett style distilling receiver used to determine the water content in petroleum or bituminous material. Receiver is made according to ASTM specifications, with the addition of the top outer standard taper joint and lower stopcock.

Similar to CG-1261 but with the addition of an overflow tube between the uptake tube and the graduated receiver.

Barrett style distilling receiver used to determine the water content in petroleum or bituminous material. Receiver is made according to ASTM specifications, with the addition of the top outer standard taper joint and lower stopcock.

Cow type design has three receivers 45&deg apart. Condensers with lower drip tip inner joints will protrude into the spherical section, permitting the distillate to fall directly into the receiving flasks.

Barrett style distilling receiver used to determine the water content in petroleum or bituminous material. Receiver is made according to ASTM specifications, with the addition of the top outer standard taper joint and lower stopcock.