Bi distillation units

The three 25mL flasks are in the same plane, rotated about the condenser axis. Hose connection is parallel to and above condenser axis. Three clips are supplied for holding flasks to condenser. All joints are 14/20. Hose connection is size A.

With standard taper joints and perforated glass disc for packing support. Length in centimeters refers to the length from the packing support to the bottom of the outer ground joint.

With standard taper joints and perforated glass disc for packing support. Length in centimeters refers to the length from the packing support to the bottom of the outer ground joint.

With standard taper joints and perforated glass disc for packing support. Length in centimeters refers to the length from the packing support to the bottom of the outer ground joint.

Distilling trap adapter with standard taper joints.

With standard taper joints and indentations to support packing. Length in centimeters refers to the length from the packing support to the bottom of the outer ground joint.,/p>

For connecting distilling column with vertical condenser. Top has #7 Ace-Thred for use with 5029 bushing and adjustable length thermo-meter.

Graduated to 15mL in 1/10mL subdivisions with lower 0.5mL contained in a precision tip for better accuracy with extremely small samples.

Length in millimeters refers to the effective length of the column as measured from the lowest to the highest indent of the column. Available in a microscale version, top center joint is 14/10 externally threaded for making an O-Ring-Cap-Seal type

Calibrated to contain. Supplied in 10mL capacity with 0.2mL subdivisions.

With joint at bottom and side.

With outer joint and external thread at top for making an O-RING-CAP-SEAL connection with mating male joints, inner joint at bottom and at 75 degree angle. Supplied with cap and O-Ring.